Ham / CB
Ham and CB radios and accessories
YAESU FT-101EE HAM RADIO, FV-101B VFO, YC-601 FREQUENCY COUNTER HAM RADIO
What a find. Yaesu FT-101EE was the most sought after HAM transceiver. It was the first transceiver to have AM.
The transceiver and the VFO still have the protective plastic on the face!
If you are looking for a great collectable, this is it.
DON'T MISS THIS ONE.
This includes all of the following:
Item | Description |
---|---|
FT-101EE | TRANSCEIVER (has protective plastic) |
FV-101B | VARIABLE FREQUENCY OSCILLATOR (has protective plastic) |
YC-601 | FREQUENCY COUNTER |
INCLUDES | EXTERNAL SPEAKER |
INCLUDES | DESK MICROPHONE |
INCLUDES | HAND MICROPHONE |
XF-30A | SSB FILTER RF PROCESSOR KIT, TYPE B |
INCLUDES | 10 METER CRYSTALS |
INCLUDES | POWER CORD CONNECTING CABLES |
INCLUDES | INSTRUCTION MANUAL FT-101E FT-101EE FT-101EX |
DOES NOT INCLUDE | DUMMY LOAD HY-GAIN TEST METER |
Quick test shows all equipment to be working, however I do not have the ability to do detailed testing.
Selling USED, AS IS.
3.5mm to 3.5mm connector cable
New connection cable
Details | |
---|---|
Condition | New |
Connectors | 3.5mm to 3.5mm |
Length | 13 inches end to end |
2 pieces COBRA 29 CB Radio, 1 Microphone
2 Cobra 29 CB radios and 1 microphone.
1 is working, 1 is not working, sold for parts.
The one that is not working does light up and seems to work but does not transmit. This is normally easy to fix by replacing the final and/or the driver. I just do a quick hook up and test. No in depth testing.
Mounting brackets and mounting bracket screws are included.
Used, Sold "AS IS"
Universal Stripping Tool, Model: HT-S501A
For stripping round cable, stranded wire, multi-conductor cable and irregular shaped cable from 22AWG up to 9.5mm (3/8")
- Model: HT-S501A
Hard to find, vintage Cobra 25GTL, USED
This Cobra 25GTL was the most sought after CB in the 25 model series.
This CB is used but in good working condition. It has some scratches and scuffs from normal use but is in fair to good condition.
The original microphone is not available so we have substituded a President microphone which works very well. There is no mounting bracket.
Note: Radio and microphone only. Test equipment does NOT come with the CB.
Company | Dynascan Corporation |
BRAND | Cobra |
Model | 25GTL |
Type | Citizens Band Transceiver |
Frequency Range | 26.965-27.405 MHz |
Frequency Control | PLL |
Power Output | 4 Watts |
Voltage | 13.8 VDC |
Country of Manufacture | Korea |
Condition | USED, in working condition |
Product Key Features | |
Type | Mobile/In-Vehicle |
Channel | 40 Channels |
Supported Modes | AM |
Features | Adjustable Squelch Adjustable Dynamike Adjustable RF Gain CB/PA Switch ANL ON/OFF Switch NB ON/OFF Switch BRT/DIM Switch RX/TX LED Backlight RX/TX Meter LED Channel Readout |
Mods and Adjustments | |
---|---|
RF power | Adjust L13, L10, L9, L8 |
Modulation | Adjust VR5 Or cut D9 |
TX power meter | Adjust VR3 |
S meter | Adjust VR1 |
Mic Wiring | |
---|---|
Stock | 1- Shield 2- Audio 3- Transmit 4- Receive |
Astatic (4 wire) | 1- Shield 2- White 3- Red 4- Black |
Astatic (6 wire) | 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC |
Daiwa EM-500 Cobra CA Series | 1- Shield & Black 2- Red 3- White 4- Blue |
Galaxy DC-521S (4 wire) | 1- Shield 2- Yellow 3- Red 4- Black |
Galaxy CB-660EI | 1- Shield & Black 2- White 3- Red 4- Blue |
Sadelta | 1- Shield 2- White 3- Brown 4- Green |
Turner | 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC |
VINTAGE EXPO 100 EXPANDER KIT MODEL S
This EXPO 100 Expander is old but has never been used
Very collectable. Box shows aging but otherwise is in good condition.
This list is compiled from information found on the internet. We believe it to be correct but you may want to do your own research to confirm.
Make | Model | Kit |
---|---|---|
Cobra | 18LTD 19-PLUS 19X 19XS 19XS 19-PLUS 19X 19XS 20LTD 21GTL 21LTD 21LTD-WX 25-PLUS 25GTL 25LTD 25LTD CLASSIC 25LTD-WX 40-PLUS 40X 66LTD 90LTD | S |
President | Andrew Jackson AR-7 AR-44 AR-711 AX-7 AX-43 AX-44 AX-711 | S |
Realistic | TRC-410 TRC-414 TRC-421 TRC-421A TRC-422A TRC-425 TRC-426 TRC-427 TRC-428 TRC-432A (LC7131) | S |
Colt | 190 (LC7130) 210 (LC7130) 222 (LC7130) 355 | S |
Craig | L103 L104 | S |
GE | 3-5804B 3-5804F 3-5816D | S |
K40 | AM | S |
Teaberry | Stalker III | S |
Maxcom | 40 | S |
Midland | 100M (LC7131) 102M (LC7131) 151M (LC7131) 76-300 77-002 (2001) 77-003 (3001) 77-004 (4001) 77-200 (200M) 77-800 77-824B | S |
Tenna | CB-24 CB-26 | S |
Uniden | PC-33 PC-43 PC-55 PC-66 (TC9106) PC-66A (SM5126) PC-66 XL PC-77 PRO-540E | S |
Unimetrics | Seahawk 40 | S |
Usaco | U-900 | S |
NDI | PC-101 PC-102 | S |
This list is un-confirmed.
Manufacture | Model | Chip |
---|---|---|
Cobra | 21GTL 25GTL | TC9106P TC9106P |
Colt | 190 210 222 | LC7130 LC7130 LC7130 |
Craig | L103 L104 | TC9106P TC9106P |
GE | 3-5804B 3-5804F | TC9106P TC9106P |
Midland | 77-200 77-002 77-003 77-004 77-824B | TC9106P LC7130 LC7130 LC7130 TC9106P |
NDI | PC-101 PC-102 | TC9106P TC9106P |
President | AR-7 AR-44 AR-711 Andrew J | TC9106P TC9106P TC9106P TC9106P |
Realistic | TRC-425 TRC-427 | TC9106P TC9106P |
Teaberry | Stalker III | TC9106P |
We don't know the details of this kit or how to install it.
Selling 'AS IS'.
VINTAGE EXPO 100 EXPANDER KIT MODEL I
This EXPO 100 Expander is old but has never been used
Very collectable. Box shows aging but otherwise is in good condition.
This list is compiled from information found on the internet. We believe it to be correct but you may want to do your own research to confirm.
Make | Model | Kit |
---|---|---|
Cobra | 21XLR 29XLR 89XLR | I |
President | Dwight D (uPD858) Honest Abe John Q Teddy R Zachary T (uPD858) | I |
Robyn | AM-500D | I |
Sears | 663.38070700 | I |
Teaberry | T-Bear T-Command T-Dispatch Titan T | I |
This list is un-confirmed.
Channels | Low | Normal | High |
---|---|---|---|
1 | 26.525 | 26.965 | 27.405 |
2 | 26.535 | 26.975 | 27.415 |
3 | 26.545 | 26.985 | 27.425 |
4 | 26.565 | 27.005 | 27.445 |
5 | 26.575 | 27.015 | 27.455 |
6 | 26.585 | 27.025 | 27.465 |
7 | 26.595 | 27.035 | 27.475 |
8 | 26.615 | 27.055 | 27.495 |
9 | 26.625 | 27.065 | 27.505 |
10 | 26.635 | 27.075 | 27.515 |
11 | 26.645 | 27.085 | 27.525 |
12 | 26.665 | 27.105 | 27.545 |
13 | 26.675 | 27.115 | 27.555 |
14 | 26.685 | 27.125 | 27.565 |
15 | 26.695 | 27.135 | 27.575 |
16 | 26.715 | 27.155 | 27.595 |
17 | 26.725 | 27.165 | 27.605 |
18 | 26.735 | 27.175 | 27.615 |
19 | 26.745 | 27.185 | 27.625 |
20 | 26.765 | 27.205 | 27.645 |
21 | 26.775 | 27.215 | 27.655 |
22 | 26.785 | 27.225 | 27.665 |
23 | 26.815 | 27.255 | 27.695 |
24 | 26.795 | 27.235 | 27.675 |
25 | 26.805 | 27.245 | 27.685 |
26 | 26.825 | 27.265 | 27.705 |
27 | 26.835 | 27.275 | 27.715 |
28 | 26.845 | 27.285 | 27.725 |
29 | 26.855 | 27.295 | 27.235 |
30 | 26.865 | 27.305 | 27.745 |
31 | 26.875 | 27.315 | 27.755 |
32 | 26.885 | 27.325 | 27.765 |
33 | 26.895 | 27.335 | 27.775 |
34 | 26.905 | 27.345 | 27.785 |
35 | 26.915 | 27.355 | 27.795 |
36 | 26.925 | 27.365 | 27.805 |
37 | 26.935 | 27.375 | 27.815 |
38 | 26.945 | 27.385 | 27.825 |
39 | 26.955 | 27.395 | 27.835 |
40 | 26.965 | 27.405 | 27.845 |
We don't know the details of this kit or how to install it.
Selling 'AS IS'.
CENTRONICS UHF/VHF/FM OR VIDEO/TV AMPLIFIER
NEW UHF/VHF/FM AMPLIFIER MODEL 1426
New unopened
FEATURES
- High gain
- Low noise figure
- Flat frequency response
- Easy installation
- Gain control & high over load capacity
- Switchable FM trap to stop FM interference
SPECIFICATIONS
Manufacture | Centronics | |
Model No. | 1426 | |
Bandwidth | 50-450MHz | 470-890MHz |
Gain | 28dB | 26dB |
Response Flatness | 2dB | |
Max. Output | 62dBmV | |
Noise Figure | 6dB | 6.5dB |
Impedance | Input | 75 ohm x 1 |
Output | 75 ohm x 1 | |
Connector | AF-61A | |
Power Requirement | 117VAC 60Hz 3.6W | |
FM Trap attenuation rejection band 95-108 MHz (-20dB switchable) |
MatchBoxPro - Experimenters / developers satellite receiver for your computer
Watch Satellite TV on your Computer
- Real time and scheduled program recording
- Time shifting to pause live TV
- Supports Internet via Satellite
- Supports Multi DVB Software
- Supports DVB-S
Match Box Pro is a mini gadget for watching digital satellite TV on your computer.
With it you can record TV or radio programs on your computer hard drive.
Experimenters dream receiver.
Allows for recordscheduling of favorite programs.
TUNER | |
Input Terminal | F type, 75Ω |
Receive Frequency | 950~2150 MHz Tuning Range |
Input Level | -65~-25dBm |
Carrier Capture Range | +/-5MHz |
Ambient Temperature | 0°C to +70°C |
QPSK & FEC | |
Symbol Rate | 1~45MSps |
QPSK filter | Root-raised cosine filter with roll-off 0.35 |
Punctured codes | 1/2, 2/3, 3/4, 5/6, 7/8 and Auto |
LNB & Switch Control | |
LNB Supply Voltage | 13/18V with Short Circuit Protection |
DiSEqC | 1.2 |
Supports | Data Burst & Tone Burst |
Antenna and LNB Control | 22KHz Tone |
Max. LNB Supply Current | 400mA |
USB INTERFACE | |
Universal Serial Bus | 2.0 Standard |
USB Connector | B type, female |
DE-MULTPLEXING | |
Max. No. Section Filtering | 32PIDs |
Engine | Software |
Stream Capture | PES & TS |
A/V FORMAT | |
Video Format | MPEG-II Main Profile & Main Level |
Audio Format | MPEG-II Audio Layer I & II |
Requirements
- Pentium 1GHz CPU or above
- Graphic card with at least 16MB RAM
- 256MB RAM or more
- One free USB2.0 port
- Windows 2000/XP/Vista
- DirectX9.0 or later version
- Satellite dish and LNBF
CLOSE OUT - sold as is
10 pieces PL259 Connector
10 pieces of PL259 connectors
Note: Installation requires soldering the center conductor
Mechanical
By design, all connectors in the UHF connector family mate using the 5⁄8 inch 24 tpi threaded shell for the shield connection and an approximately 0.156 inch-diameter (4 mm) pin and socket for the inner conductor. Similar connectors (M connectors) with an incompatible 16 mm diameter, 1 mm metric thread have been produced, but these are not standard UHF connectors by definition.
Surge impedance
UHF connectors have a non-constant surge impedance. For this reason, UHF connectors are generally usable through HF and the lower portion of what is now known as the VHF frequency range. Despite the name, the UHF connector is rarely used in commercial applications for today's UHF frequencies, as the non-constant surge impedance creates measurable electrical signal reflections above 100 MHz.
Virtually all of the impedance bump and loss is in the UHF female. A typical SO-239 UHF female, properly hooded, has an impedance bump of about 35 Ohms. The length of the bump is typically 1⁄2 inch, where the female pin flares to fit over the male pin. This bump can be mitigated by using a honeycomb dielectric in the female pin area. Many VHF/UHF amateur operators use special UHF females that maintain a 50 Ohm surge impedance.
5 PIN DIN MALE HAM/CB MICROPHONE MIC CONNECTOR PLUG
5 Pin DIN Male Solder Connector pins arranged in 180° configuration
The 5 Pin DIN Male Solder Connector pins are arranged in a 180° configuration for use with AT Style connectors. This connector is economic and lightweight. The plug comes in four parts and can be easily disassembled for access to the solder cups. The 5 Pin DIN Male Connector accepts up to 22 AWG wire. The Solder cups are easy to work with and the eyes are easy to thread. The 5 Pin DIN Male Connector is designed with molded strain relief and accepts cables up to 7mm.
Features:
- 5 Pin DIN Male
- Plastic
- Lead Type: Solder Cups
- Molded Strain Relief
- Accepts 22 AWG Wire
- Accepts Cable up to 7mm
Note: color may be gray or black
UHF SO-239 Female to Female Barrel Connector for PL-259 Plugs
Used to connect cable with PL-259 connectors, or can be used to change PL-259 male to SO-239 female
Connect 2 coax cables with the barrel connector
- S0-239 UHF female connector.
- Used for connecting two PL-259 connectors together.
- Nickel plated and designed to offer the lowest VSWR rating of the two series
- Size : 27 x 15mm/1.1" x 0.6" (L*D)
- Commercial Grade UHF Series Adapters Nickel-Plated Machined Brass Construction
- Package Content: UHF SO239 Female to Female Connector
PL-259 feed through to SO239 Connector with ground lug
Used for equipment grounding. Avoid static charges that can damage your radios. Your ham shack needs this!
Lightning Arrestor Connector PL259(UHF male) Plug TO SO239 plug(UHF Female)
- Coaxial Lightning Arrester,Freq:DC-3GHZ
- PL259(UHF male) Plug TO SO239 plug UHF Female)
- Lightning surge protector for Coaxial cable.
- The Lightning Arrester protectors offer HF/VHF/UHF other frequency equipment with extremely low loss. They boast an insertion loss of less than 0.1 dB.
- Arresters should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building. They can also be installed near the antenna for additional protection.
It is a great lightning protection solution for 2G, 3G, 4G,HF,VHF,UHF and LTE service as well as 2.4 GHz Wi-Fi, 900 MHz, Ham radio and other lower frequency Antenna. This model features PL259(UHF male) Plug TO SO239 plug(UHF Female) to be used inline. This protector will pass DC, so it is suitable for applications where DC is carried through the coax cable. Both connector ports of this unit are equally protected -- it can be installed in either orientation. A ground lug and terminal on the housing provides superior grounding.
Specification
- Frequency Range: DC - 6 GHz
- Impedance: 50 ohms
- Insertion Loss: < 0.1 dB
- Discharge Voltage: DC230V
- Packing includes:1 LIGHTNING ARRESTOR
UG-175/U Reducer for RG-58, Silver Plated for PL-259 connectors
This reducer adapts a standard PL-259 connector for RG-58 coaxial cables
Features:
- UG-175/U reducers
- Adapts standard PL-259 connector for RG-58 coaxial cables
- Ideal for customizing your own cables
- Silver-plated
Specifications | |
---|---|
Part No: | UG-175/U |
RoHS: | Yes |
Type: | UHF Reducing Adapter |
Operating Frequency: | 0 to 300 Hz to MHz |
Gender: | Plug |
Body Orientation: | Straight |
Operating Temperature: | -65 to 165 °C |
Dimension: | 25.4 x 10.92 mm |
Unit of Measure: | Each |
UG-176/U REDUCER FOR PL-259 USED WITH RG8X, MINI 8, RG-59, or LMR-240
This reducer adapts a standard PL-259 connector to RG8X, MINI 8, RG-59, or LMR-240 coaxial cables
Features:
- UG-176/U reducers
- The UG-176/U reducers adapts a UHF Male PL-259 to RG8X, MINI 8, RG-59, or LMR-240 coaxial cable
- Ideal for customizing your own cables
- Silver-plated
Specifications | |
---|---|
Part No: | UG-176/U |
RoHS: | Yes |
Type: | UHF Reducing Adapter |
Operating Frequency: | 0 to 300 Hz to MHz |
Gender: | Plug |
Body Orientation: | Straight |
Operating Temperature: | -65 to 165 °C |
Dimension: | 25.4 x 11.1 mm |
Unit of Measure: | Each |
Gold SO239 UHF Female Chassis Socket
Square Panel Mount Bulkhead Four 4 Hole
Great for replacing your worn connector or for your "build it yourself" projects
when only the BEST will do.
Gold UHF Female SO239 4-Hole Panel Chassis Mount Flange Panel Mount AdapterGold Solder Cup RF Coaxial Coax Connector Adapter for PL259 Male
- Antenna Adapter UHF Female SO239 connector
- Impedance: 50ohm
- Low-loss
- Surface treatment: Gold plated
- Application: HAM, CB, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi, Radios, External Antenna, Broadcast, Telecom, CCTV, Microwave Applications, Digital Communication System and more...
- Package includes: UHF Female Panel Connector
FS1 UNIVERSAL EURO AC POWER CORD CABLE
This European universal power cord is compatible with many devices.
Don't pay full price. Buy here for the best deal!
Details:
- 18AWG / 2
- UL Listed
- RoHS Compliant
- 2 Prong EURO plug
- Bulk Packed
Fits most models of these meters;
- First Strike Meters
- Sathero Meters
- Trimax Meters
- Birdog Meters
- Super Buddy Meters
- Super Buddy
- and other brand satellite meters
Satellite Meter Models;
- FS1-ProHD
- FS1-SE
- FS1-L
- FS1-K
- FS1
- RA2002C
- OTM500 3.0
- OTM600C
- OTM 750
- MF-1900
- MS1900
- MF-1900
- MS1900
- and more
Fits these Lexmark printers;
- Z600
- Z611
- Z645
- Z705
- Z715
- Z730
- Z735
- and others...
December 13, 2019 Master Satellite / Transponder List
READ THIS COMPLETELY BEFORE USING OUR MASTER LIST.
This is a full and complete list of satellites and transponders.
REQUIRES MODIFICATION BEFORE LOADING TO ANY METER OR RECEIVER.
DOWNLOADS ARE LOCATED IN THE "DOWNLOADS" TAB OF YOUR ACCOUNT
The attached xls file contains our extensive list of all known satellites and transponders formatted for the Sathero meter meters and other meters. You only need to modify this master list to make it your own personalized list.
This is very straight forward and easy to do. Just open the list in your favorite editor and delete the rows containing the satellites you don't need. If you delete a satellite, delete all the transponders under that satellite. Delete entire rows. Never delete part of a row or your finished list will not work. Do not leave blank rows in your new list.
Once you have pared down the list to the satellites you want to keep, delete the the transponders that you don't need under each satellite. The smaller the list the quicker it will load to the meter and the faster the meter will operate.
Pay attention to the LNBF LO frequencies and make sure they match the LNBF you will be using. If they don't match, change them.
Load your new list to your meter and you are ready to use it.
Note: Your list should not be very big. Each satellite should have only 1 or 2 transponders per band. You can easily keep every satellite viewable from your location and 2 transponders (4 if you have both C and Ku) and it will still be small enough.
Editors you can use to modify .xls files:
- LibreOffice Calc (free)
- OpenOffice Calc (free)
- Microsoft Office Excel ($$$)
Notes:
- This list contains C, Ku and Ka bands. Most meters and receivers WILL NOT RECEIVE KA.
- This list contains transponders that are not active or have programming only a few hours a day.
- This list is very large and most meters and receivers will not accept such a large list.
To Do List
- Remove all satellites and transponders that you don't need.
- Remove all but 2 to 10 transponders for each satellite you want to keep.
- When removing satellites and transponders, remove the entire line. Do not leave empty lines.
- Check the local oscillator settings to make sure they match the LNB you are using.
- FILE MUST BE SAVED AS A .xls FILE.
After modification this list can be used on our meters and most modern meters.
If you feel our work has some value to you, please help us by donating. Thank you.
All software is offered "as is" and without guarantee. This software is for experienced users only. If you don't have the ability to load this software or if you feel unsure of your abilities, DO NOT use this software. DMS International is in no way responsible for the use or mis-use of this software. Any repairs required because of your use or mis-use of this software will be charged at normal bench repair rates and normal replacement parts cost. By using this software you are agreeing to these terms.
USE THIS SOFTWARE AT YOUR OWN RISK!
We do not provide support for this file or loading it to your meter.
This Master List may be modified. This comment must remained attached to the files.
CEN-TECH 7 Function Digital Multimeter
This versatile 7 function digital multimeter provides precise measurements and tests for a variety of electronics.
This multimeter tests AC voltage, DC voltage, DC current, continuity, resistance, transistor and battery test. Features an easy-to-read digital LCD display and automatic zero adjust. It is a great addition to your work bench.
- Get accurate readings for DC voltage, DC current, AC voltage, resistance, transistor test, diode test and battery test
- Features easy-to-read 3-1/2 in. digital LCD display
- Automatic zero adjust
- Updates 2.5 times per second
- Overload indicator
- Low battery indicator
- Fuse and diode protected circuit
- Includes two 24 in. 18 gauge CCA test leads
- High impact housing with soft over-mold for a comfortable grip
Details | |
---|---|
Manufacture | CEN-TECH |
Model | 69096 |
Condition | NEW |
AC Volts | 200-750V |
Accessories Included | two 24 in. test leads |
Battery Included | Yes |
Battery required | one 9V |
Display resolution | 1999 |
Display type | LCD |
Frequency (Hz) | 45-150 Hz |
Number of functions | 7 |
Product Height | 1 in. |
Product Length | 5 in. |
Product Width | 2-11/16 in. |
F connector wrench for hard to access places
Use to connect coax in hard to reach places
Can't screw on the coax behind your TV, DVD, Blueray, etc?
This is the wrench you need.
Details | |
---|---|
Manufacture | GStar |
Model | F Wrench |
Condition | New |