FS1 UNIVERSAL EURO AC POWER CORD CABLE

December 13, 2019 Master Satellite / Transponder List

READ THIS COMPLETELY BEFORE USING OUR MASTER LIST.

This is a full and complete list of satellites and transponders.
REQUIRES MODIFICATION BEFORE LOADING TO ANY METER OR RECEIVER.

DOWNLOADS ARE LOCATED IN THE "DOWNLOADS" TAB OF YOUR ACCOUNT

The attached xls file contains our extensive list of all known satellites and transponders formatted for the Sathero meter meters and other meters. You only need to modify this master list to make it your own personalized list.

This is very straight forward and easy to do. Just open the list in your favorite editor and delete the rows containing the satellites you don't need. If you delete a satellite, delete all the transponders under that satellite. Delete entire rows. Never delete part of a row or your finished list will not work. Do not leave blank rows in your new list.

Once you have pared down the list to the satellites you want to keep, delete the the transponders that you don't need under each satellite. The smaller the list the quicker it will load to the meter and the faster the meter will operate.

Pay attention to the LNBF LO frequencies and make sure they match the LNBF you will be using. If they don't match, change them.

Load your new list to your meter and you are ready to use it.

Note: Your list should not be very big. Each satellite should have only 1 or 2 transponders per band. You can easily keep every satellite viewable from your location and 2 transponders (4 if you have both C and Ku) and it will still be small enough.

Editors you can use to modify .xls files:

• LibreOffice Calc (free)
• OpenOffice Calc (free)
• Microsoft Office Excel ($$$)

Notes:

• This list contains C, Ku and Ka bands. Most meters and receivers WILL NOT RECEIVE KA.
• This list contains transponders that are not active or have programming only a few hours a day.
• This list is very large and most meters and receivers will not accept such a large list.

To Do List

• Remove all satellites and transponders that you don't need.
• Remove all but 2 to 10 transponders for each satellite you want to keep.
• When removing satellites and transponders, remove the entire line. Do not leave empty lines.
• Check the local oscillator settings to make sure they match the LNB you are using.
• FILE MUST BE SAVED AS A .xls FILE.

After modification this list can be used on our meters and most modern meters.

If you feel our work has some value to you, please help us by donating. Thank you.

F connector wrench for hard to access places

Use to connect coax in hard to reach places

Can't screw on the coax behind your TV, DVD, Blueray, etc?
This is the wrench you need.

10 pieces RG-6 crimp F-connector

No need for expensive tools

RG-6 F-connector with crimp ring

Low cost, easy to install

You get 10 pieces

FS1-ProHD Main Board, defective

Defective main board good for parts

These are defective main boards that may have minor problems or major problems. They are great for retrieving parts. If you need parts for your meter this is the cheapest way of getting them.

Defective, sold AS IS, no return

SH-100HD SATHERO SH-100HD Digital satellite finder

Satellite Finder SH-100HD

SH-100HD SATHERO SH-100HD, Digital satellite finder, Digital satellite meter, HD DVB-S/S2, Demodulation QPSK, 8PSK, Display POWER, C/N, Quality value, Upgrade software & parameters through USB2.0 Port, Easy to read LCD

Pocket Satellite Finder SH-100HD

• DVB-S/S2
• Smallest and fastest digital signal finder
• Input Frequency 950~2150MHz
• Input Level -65~ -25dBm
• Input Impedance 75Ω
• Demodulation QPSK, 8PSK
• Preset global satellite data
• Satellite parameters editable
• Clear and easy to read LCD
• Signal Lock audio tone
• Function operation and Signal Lock Light
• Indicator Lights for 13/18 volts
• Indicator lights for 22 KHz
• LNB short-circuit protection
• Upgrade software & parameters through USB2.0 Port

Includes:

• Top housing
• LCD
• Video driver board

View pictures for more information.
Close out
Sold as is

USB 2.0 mini USB to RS-232 Android DB9 Driver Adapter Cable

Product Description:

The USB to serial adapter allows you to connect serial devices to a computer via an available USB Port.

Product Features:

1. Provides the connection between USB and the traditional RS-232 serial port.
2. Works with older Sathero meters, cellular phones, PDAs, digital cameras, modems, etc.
3. Supports the RS-232 serial interface (standard 9-pin serial).
4. Supports automatic handshake mode.
5. USB full speed communication and bus powered.
6. Single cable USB to serial communication.
7. Easy installation.

System requirements:

• Linux 2.4 or above
• Windows 98SE /ME /2000 /XP /Vista /7/8/8.1/10
• Mac OS 9.1 & higher

Includes:

• Programming cable approximately 45 inches long

RS-232 to mini-USB

Plug into meter or other device and to TV or recording device

Features:

• High-speed Transmission & Pure Sound Quality
• Enjoy movies at home with 3.5mm RCA Audio Video Cable
• Easy & Simple Connection. Plug the single one into STB and plug 3 ones into TV.

Product Description:

3.5mm plug to video/stereo RCA plugs

Specifications:

• Material: PVC
• Cable Color: Black
• Wire Length: 1.2 meters
• Connectors:
  1 x 3.5mm
  3 x RCA

Includes:

• Audio/Video Cable

8DTEK King Kong LCD Display and Display Board

NEW LCD display and display board

This is a new LCD and driver board for the 8dtek King Kong meter
1 only

USED 8DTEK King Kong meter for parts

USED KingKong meter for parts only

This is a used NOT WORKING 8dtek King Kong meter sold for parts only
1 only

SOLD "AS IS", NO RETURNS OR REFUNDS

Authentic original equipment from the makers of First Strike Meters

Made for these models (and more):

• FS1-ProHD
• FS1-SE
• FS1-L
• FS1-K
• FS1
• RA2002C
• OTM500 3.0
• OTM600C
• OTM 750
• MF-1900
• MS1900

Does not include the A/C power cord.

Why buy a knock-off when you can buy the original for less?

Replacement Parts Website

Free Worldwide Satellite / Transponder List ( June 2021 )