COLLECTABLE ADVERTISING FLAG FROM WILSON ELECTRONICS

Great find for a collector of satellite memories. Wilson was a huge name in the very early years of backyard satellite. Wilson was located in Henderson, Nevada.

Here is your chance to own a part of satellite history.

Flag looks like it is nylon. There is a small stain on it. You can see it on the pictures. Otherwise it looks very good.

COLLECTABLE ADVERTISING FLAG FROM WILSON ELECTRONICS

Great find for a collector of satellite memories. Wilson was a huge name in the very early years of backyard satellite. Wilson was located in Henderson, Nevada.

Here is your chance to own a part of satellite history.

Flag looks like it is nylon.

MICRO SWITCH SET FOR SG-2100 and other DiSEqC MOTOR

This is the micro switch set used in the SG-2100 DiSEqC motor.

Micro switches often fail. Use this replacement switch set that comes directly from the SG-2100 factory.
Comes with both switches on one PCB and the pigtail with connector as shown in the pictures.
If you have a genuine SG-2100 this is a direct replacement. This switch set was used in most brands of DiSEqC motors.

Check the pictures carefully and compare to your parts before purchasing.

VINTAGE COLLECTABLE AUGUST 1991 SATELLITE WATCH NEWS

AUGUST OF 1991 SATELLITE WATCH NEWS

Great collectable from years gone by.

You will get the August magazine:

• Satellite Watch News August Volume 6, No. 8

Condition is very good showing only minor signs of wear and paper aging.

VINTAGE COLLECTABLE JULY 1991 SATELLITE WATCH NEWS

JULY OF 1991 SATELLITE WATCH NEWS

Great collectables from years gone by.

You will get July magazine:

• Satellite Watch News July Volume 6, No. 7

Condition is very good showing only minor signs of wear and paper aging.

10 pcs DeltaCard for Satellite Receiver Irdeto Access

Use this product ONLY for DIRECTV SWM-LNB

Technical Specifications

• Frequency Range: 2-2150MHz
• Insertion loss: 1.5dB typical
• Input: 100-120VAC / 60Hz / 0.6A max. / 30W max.
• Output: 21V / 1.2A max. / 25.2W max.
• Security: Double insulated / Class II
• Fuse protection: 250V / 2A (UL fuse)
• Power cord: 2 pole polarized male plug / 1.8m
• Connectors: "F" type (red connector to SWM)
• Enviromental requirements: Indoor use only.
• Operating temperature range: 0 to 52°C
• Dimensions: 140.5 x 82 x 42 mm

B-MAC satellite decoder from Scientific Atlanta

Selling USED 'AS IS'

Powers up, POWER light comes on, AUTH light flickers since it can not find signal. I have no way of doing more tests but it seems to indicate that the unit is working.

Selling USED 'AS IS'

Trimax SM-3500, SM-2500, SM-2200, SM-1100 Satellite Meter Programming Cable

Trimax meter Li-ion Charger for SM-1100, SM-2200, SM-2500, SM-3500 and SM-4500

Model: HT-312B - Used for RG-58 (3C2V), RG-59/62 (4C2V)

Adjustable blade depth with hex wrench included.
V-block is reversible.

For stripping round cable, stranded wire, multi-conductor cable and irregular shaped cable from 22AWG up to 9.5mm (3/8")

• Model: HT-S501A

MatchBoxPro - Experimenters / developers satellite receiver for your computer

December 13, 2019 Master Satellite / Transponder List

READ THIS COMPLETELY BEFORE USING OUR MASTER LIST.

This is a full and complete list of satellites and transponders.
REQUIRES MODIFICATION BEFORE LOADING TO ANY METER OR RECEIVER.

DOWNLOADS ARE LOCATED IN THE "DOWNLOADS" TAB OF YOUR ACCOUNT

The attached xls file contains our extensive list of all known satellites and transponders formatted for the Sathero meter meters and other meters. You only need to modify this master list to make it your own personalized list.

This is very straight forward and easy to do. Just open the list in your favorite editor and delete the rows containing the satellites you don't need. If you delete a satellite, delete all the transponders under that satellite. Delete entire rows. Never delete part of a row or your finished list will not work. Do not leave blank rows in your new list.

Once you have pared down the list to the satellites you want to keep, delete the the transponders that you don't need under each satellite. The smaller the list the quicker it will load to the meter and the faster the meter will operate.

Pay attention to the LNBF LO frequencies and make sure they match the LNBF you will be using. If they don't match, change them.

Load your new list to your meter and you are ready to use it.

Note: Your list should not be very big. Each satellite should have only 1 or 2 transponders per band. You can easily keep every satellite viewable from your location and 2 transponders (4 if you have both C and Ku) and it will still be small enough.

Editors you can use to modify .xls files:

• LibreOffice Calc (free)
• OpenOffice Calc (free)
• Microsoft Office Excel ($$$)

Notes:

• This list contains C, Ku and Ka bands. Most meters and receivers WILL NOT RECEIVE KA.
• This list contains transponders that are not active or have programming only a few hours a day.
• This list is very large and most meters and receivers will not accept such a large list.

To Do List

• Remove all satellites and transponders that you don't need.
• Remove all but 2 to 10 transponders for each satellite you want to keep.
• When removing satellites and transponders, remove the entire line. Do not leave empty lines.
• Check the local oscillator settings to make sure they match the LNB you are using.
• FILE MUST BE SAVED AS A .xls FILE.

After modification this list can be used on our meters and most modern meters.

If you feel our work has some value to you, please help us by donating. Thank you.

Di-electric plate used on BSC621, BSC621-2 and BSC622

Converts your C or C/Ku band Linear LNBF to a Circular LNBF

Originally came in the BSC621, BSC621-2 and BSC622 but works for most LNBFs.
This dielectric plate will fit inside most standard size 65mm OD C or C/Ku band LNBF.

Can be filed or sanded down for a perfect fit in other LNBFs.

Dielectric plates are used to convert circularly polarised signals to linear polarisation. They work by utilising the difference in dielectric constant between fibreglass and air.

Signals entering a waveguide parallel to the plate will undergo a phase shift different to the signal entering the waveguide at 90 degrees to the plate, allowing Circular polarisation.

TBS8920 Digital Satellite TV Card

Transport Stream Recording!!!

• Watch Satellite TV & Listen to Radio on your PC
• DVB-S2/DVB-S HDTV Satellite Receiver
• Broadband Internet via Satellite
• High-speed Data Download via Satellite
• Real Time and Scheduled Program Recording (PVR)
• Time Shifting to Pause Live TV
• Supported by DVBDream, ProgDVB, AltDVB, Skygrabber, and more...

Overview

Digital satellite TV card is for using with computer to receive digital satellite programs, including H.264 DVB-S2 HDTV(for model 8920). Insert this card in computer PCI slot, connect it with dish LNB and install the driver and DVB player from CD, you can watch and record free satellite TV programs as well as digital satellite radio. The easy-to-use software allows you not only to watch TV programs but also to play DVD, VCD, SVCD, CD, Mp3, Mp4, RM, Mov, SWF, WMV, DIVX and other media files. This card works with popular DVB software like ProgDVB, DVBDream, Skygrabber and Tuner4PC...It supports internet via satellite and data download. (those in red need plugins)

Features

Digital Satellite TV & Radio Receiving

• Enjoy Digital Satellite TV & Radio on Desktop or Laptop
• Electronic Program Guide (EPG) and Teletext
• Multi Channel Preview and Channel Recall
• Program Watching Reminder
• Favorite List
• Dish Motor Driving Control

• Support HDTV at High Resolution up to 1080i

• Real time and Scheduled Program Recording into MPEG2 format
• Time-Shifting free you from brief interruption
• Frame Capture, Edit and Slideshow

• Support DVD, VCD, SVCD, CD, Mp3, Mp4, RM, Mov, SWF, WMV, DIVX...
• Record DVD video & audio

• 4:3 & 16:9 Selectable Aspect Ratio
• Stereo Audio Effect Customization
• Remote Control and Hot Keys
• Video Quality Adjustment
• Internet via Satellite
• Optional Skin

Hardware & Software Requirement

To use PCI DVB-S TV card, you must have satellite dish, LNB, cable and other necessary accessories. You must have one computer with the following configurations:

• Windows 2000/XP/Vista
• DirectX9.0 or later Version
• Available PCI Slot
• CD-Rom (Driver and Software Installation)

For DVB-S

• 1GHz Pentium III CPU or Above
• 256MB RAM or Above
• Graphic Card with at Least 16MB RAM

For DVB-S2

• HDTV(1080i/MPEG4(AVC/H.264))
• 3.0 GHz Pentium IV CPU or Above
• 1 GB RAM or Above
• Graphic Card with at Least 64MB RAM

Package Content:

• 1 x TBS8920 PCI-E DVB-S2 TV Tuner Card
• 1 x remote control
• 1 x IR receiver
• 1 x Software CD

10 pieces RG-6 crimp F-connector

No need for expensive tools

RG-6 F-connector with crimp ring

Low cost, easy to install

You get 10 pieces

Satbracket, Universal bracket to point to two satellites

Get two separate satellite signals without adding another dish, just add a second LNBF

Satbracket helps you turn your current 18" dish into a dual signal configuration. It's simple, if you are already pointed at one source of satellite transmission just attach the bracket and with another LNB, instantly receive signal from any other adjacent satellite to your original point.

Works for any of these pairs...

Note: This information taken from the packaging

SH-100HD SATHERO SH-100HD Digital satellite finder

Satellite Finder SH-100HD

SH-100HD SATHERO SH-100HD, Digital satellite finder, Digital satellite meter, HD DVB-S/S2, Demodulation QPSK, 8PSK, Display POWER, C/N, Quality value, Upgrade software & parameters through USB2.0 Port, Easy to read LCD

Pocket Satellite Finder SH-100HD

• DVB-S/S2
• Smallest and fastest digital signal finder
• Input Frequency 950~2150MHz
• Input Level -65~ -25dBm
• Input Impedance 75Ω
• Demodulation QPSK, 8PSK
• Preset global satellite data
• Satellite parameters editable
• Clear and easy to read LCD
• Signal Lock audio tone
• Function operation and Signal Lock Light
• Indicator Lights for 13/18 volts
• Indicator lights for 22 KHz
• LNB short-circuit protection
• Upgrade software & parameters through USB2.0 Port