Parts
REPLACEMENT MICRO SWITCH SET FOR SG-2100 DiSEqC MOTOR
MICRO SWITCH SET FOR SG-2100 and other DiSEqC MOTOR
This is the micro switch set used in the SG-2100 DiSEqC motor.
Micro switches often fail. Use this replacement switch set that comes directly from the SG-2100 factory.
Comes with both switches on one PCB and the pigtail with connector as shown in the pictures.
If you have a genuine SG-2100 this is a direct replacement. This switch set was used in most brands of DiSEqC motors.
Check the pictures carefully and compare to your parts before purchasing.
10 pcs DeltaCard for Satellite Receiver Irdeto Access
Experimenters and hobbyists, this could be what you are looking for!
You get 10 pieces
These cards are all numbered and appear to be unused.
Made for InXWorld.
SOLD AS IS - I have no way of testing these cards
Please read the description and review the pictures closely before making a buying decision.
DIRECTV Model: PI-21 21V Power Inserter
Use this product ONLY for DIRECTV SWM-LNB
Technical Specifications
- Frequency Range: 2-2150MHz
- Insertion loss: 1.5dB typical
- Input: 100-120VAC / 60Hz / 0.6A max. / 30W max.
- Output: 21V / 1.2A max. / 25.2W max.
- Security: Double insulated / Class II
- Fuse protection: 250V / 2A (UL fuse)
- Power cord: 2 pole polarized male plug / 1.8m
- Connectors: "F" type (red connector to SWM)
- Enviromental requirements: Indoor use only.
- Operating temperature range: 0 to 52°C
- Dimensions: 140.5 x 82 x 42 mm
FTA, SKY MEXICO, DBS Satellite Ku Universal Mono-block LNBF for 4° spacing
Brand: DMS International
Model: JSC-MB4-2
Digital Ready, HDTV approved, latest technology provides the best possible performance.
Receives two satellites at four degree spacing.
Commonly used for Galaxy 19 (97.0°W) and SES 1 (101.0°W)
This is a 'Universal' LNBF that works anywhere in the world.
Works for SKY MEXICO, FTA, DBS, and more.
The famous DMS DiSEqC switch is built in allowing you to deliver both signals down one coax without adding more devices in line. 0.2dB noise figure, high stability and high gain insures that you get the best possible picture. Only JSC LNBFs have the ability to give you the best reception.
| Specifications | |
| Input Frequency | 10.7 - 11.7 GHz and 11.7 - 12.75 GHz |
| Output Frequency | 950 - 1950 MHz and 1100 - 2150 MHz |
| LO Frequency | 9.75 GHz and 10.6 GHz |
| LO Initial Accuracy (@25°C) | ± 1 MHz |
| LO Temperature Drift (@ -40 to 60°C) | ± 3 MHz |
| LO Phase Noise (@ 1 KHz offset) | -60 dBc/Hz |
| LO Phase Noise (@ 10 KHz offset) | -80 dBc/Hz |
| LO Phase Noise (@ 100 KHz offset) | -100 dBc/Hz |
| Noise Figure | 0.2 dB |
| Conversion Gain | 50 to 62 dB |
| Gain Variation (over operating band) | 5 dB p-p (typical) |
| Gain Flatness (any 27 MHz) | ± 0.5 dB |
| Cross Pol. Isolation | 20 dB (minimum) 25 dB (typical) |
| Image Rejection | 40 dB (minimum) |
| P 1 dB | 0 dBm (minimum) |
| Output VSWR | 2:1 |
| Spurious Response (@ 1700 MHz) | -58 dBm (maximum) |
| DC Current Consumption | 180 mA (maximum) |
| Polarization Switching Voltage | Vertical: 10.5 to 14.2 volts Horizontal: 15.5 to 21 volts |
| Band Switching | Low: 0 KHz, High 22 ± 4 KHz |
| LO Spurious | -45 dBm (maximum) |
| Operation Temperature | -40°C to 60°C |
| Waterproof | +60°C water for 5 minutes |
| Output Connector | 75 ohm F type |
Universal Ku LNBF Model KSC321S-2 0.2 dB Noise Figure by DMSIUSA
High gain, quality Ku Universal LNBF
High gain single output Ku LNBF using 10.7 to 12.75 GHz Universal with 09750 and 10600 MHz LO frequencies. Rock solid stability and 0.2 dB noise figure. 40mm throat size allows mounting to all popular dishes. Works world wide!
Specs:
- Input: 10.70 ~ 12.75GHz
- Output: 950 ~ 2150MHz
- L.O.: 9.75/10.60GHz
- Noise: 0.2dB
- Gain: 60dB
Don't be fooled by the price.
This is the best LNBF featuring very high gain while maintaining great stability.
We have never had a failure of this LNBF.
Avenger PLL321S-2 PLL Universal Single Ku LNBF
Phase Locked Loop LNBF with 300KHz or better stability!
Low cost LNBF for Satellite Radio and DataCasting
Phase Locked Loop LNBF with 300KHz or better stability! Very affordable price that compares to the price of current LNBFs.
Avenger PLL LNBFs are WaterPROOF and built for the most extreme environments like South America. Demand the best. Demand high stability and WaterPROOF LNBFs.
DMS International introduces another LNBF break through product. Our new Avenger PLL321 S-2 LNBFs are about the same price as the common LNBFs available today. Now you can get extremely good stability (300 KHz or better) for your satellite system at about the same price that you would pay for a LNBF with 1 ,500 KHz (1 .5 MHz) stability or much worse. 300 KHz or 1 ,500 KHz, which one would you like on your dish? Now you can have the high stability of PLL at a very affordable price. These LNBFs are at least 5 times more stable than non-PLL LNBFs on the market today!!!
This LNBF is a MUST HAVE for HD receivers and MPEG4 receivers. If you are upgrading to MPEG4 it only makes sense to upgrade your LNBF to PLL.
| Model | PLL321S-2 |
|---|---|
| Outputs | 1 (Single) |
| Input | 10.70 ~ 12.75 GHz |
| Output | 950 ~ 2150 MHz |
| LO | 9.750 & 10.600 GHz |
| Noise Figure | 0.1 dB |
| Throat Size | 40mm |
Specifications
| Specification | Low Band | High Band |
|---|---|---|
| Input Frequency Range | 10.70~11.70 GHz | 11.70~12.75 GHz |
| Output Frequency Range | 950~1950 MHz | 1100~2150 MHz |
| Reflector Type | Offset | |
| F/D Ratio | 0.5 ~ 0.7 | |
| Noise Figure | 0.1 dB (Typ.) | |
| Conversion Gain | 60 dB (Typ.) | |
| Gain Flatness | ±0.5dB/27 MHz | |
| Cross POL. Isolation | 20dB (Min.) | |
| L.O. Frequency | 9.75 GHz | 10.60 GHz |
| L.O. Frequency Stability | ±300 KHz (Max.) @+25°C ±500 KHz (Max.) @-40°C~+60°C | |
| Operating Temperature | -40°C ~ +60°C | |
| L.O. Phase Noise | -55dBc/Hz@ 1 KHz -75dBc/Hz@ 10 KHz -90dBc/Hz@ 100 KHz | |
| Image Rejection | 40 dB (Min.) | |
| Output VSWR | 2.5:1 (Max.) | |
| Output Power Level | 0 dBm (Min.)(at 1dB gain compression) | |
| Connector Type | 75Ω Female Connector | |
| DC Current Consumption | 165 mA (Max.) | |
| POL. Switching Voltage | 11.5~14.0V @VP 16.0~19.0V @HP | |
| 22 KHz switching | 0 | 22 KHz ±4 KHz |
Don't be fooled by the price.
This is the best LNBF featuring very high gain while maintaining great stability.
We have never had a failure of this LNBF.
FS1 UNIVERSAL AC POWER CORD CABLE
This universal power cord is compatible with many devices.
Don't pay full price. Buy here for the best deal!
Details:
- NEMA1-15P/IEC320 C7
- 18AWG / 2
- UL Listed
- RoHS Compliant
- 2 Prong US plug
- Bulk Packed
Fits most models of these meters;
- First Strike Meters
- Sathero Meters
- Trimax Meters
- Birdog Meters
- Super Buddy Meters
- Super Buddy
- and other brand satellite meters
Satellite Meter Models;
- FS1-ProHD
- FS1-SE
- FS1-L
- FS1-K
- FS1
- RA2002C
- OTM500 3.0
- OTM600C
- OTM 750
- MF-1900
- MS1900
- MF-1900
- MS1900
- and more
Fits these Lexmark printers;
- Z600
- Z611
- Z645
- Z705
- Z715
- Z730
- Z735
- and others...
FS1 BATTERY
Replacement screen for First Strike Meters model FS1 L Series
Installation requires soldering ability
Top Housing with Keypad, FS1-ProHD
Keypad is installed on housing
Need to replace your keypad? This is the easiest way.... replace the top housing and avoid removing and replacing only the keypad.
FS1 replacemnt Keypad
Fits the following models:
- FS1-SE
- FS1-L
- FS1-K
- RA2002C
- OTM500 3.0
- OTM600C
- OTM 750
- MF-1900
- MS1900
- and more
Top Housing with Keypad, FS1
Keypad is installed on housing
Avoid the hassle of replacing your keypad by replacing the top housing with the keypad installed
Fits the following models:
- FS1-SE
- FS1-L
- FS1-K
- RA2002C
- OTM500 3.0
- OTM600C
- OTM 750
- MF-1900
- MS1900
- and more
Bottom Housing, FS1 fits many First Strike Meters
Includes battery door
Fits the following models:
- FS1-ProHD
- FS1-SE
- FS1-L
- FS1-K
- FS1
- RA2002C
- OTM500 3.0
- OTM600C
- OTM 750
- MF-1900
- MS1900
Ruff Neck Jacket for FS1 fits many First Strike Meters
Fits the following models:
- FS1-ProHD
- FS1-SE
- FS1-L
- FS1-K
- FS1
- RA2002C
- OTM500 3.0
- OTM600C
- OTM 750
- MF-1900
- MS1900
- and more