Search
Search Criteria
Products meeting the search criteria
Universal Ku LNBF Model KSC321S-2 0.2 dB Noise Figure by DMSIUSA
High gain, quality Ku Universal LNBF
High gain single output Ku LNBF using 10.7 to 12.75 GHz Universal with 09750 and 10600 MHz LO frequencies. Rock solid stability and 0.2 dB noise figure. 40mm throat size allows mounting to all popular dishes. Works world wide!
Specs:
- Input: 10.70 ~ 12.75GHz
- Output: 950 ~ 2150MHz
- L.O.: 9.75/10.60GHz
- Noise: 0.2dB
- Gain: 60dB
Don't be fooled by the price.
This is the best LNBF featuring very high gain while maintaining great stability.
We have never had a failure of this LNBF.
FTA, SKY MEXICO, DBS Satellite Ku Universal Mono-block LNBF for 4° spacing
Brand: DMS International
Model: JSC-MB4-2
Why are these so cheap? We are closing these out at a super low price. They are new. We have not had any problems with this LNBF.
Digital Ready, HDTV approved, latest technology provides the best possible performance.
Receives two satellites at four degree spacing.
Commonly used for Galaxy 19 (97.0°W) and SES 1 (101.0°W)
This is a 'Universal' LNBF that works anywhere in the world.
Works for SKY MEXICO, FTA, DBS, and more.
The famous DMS DiSEqC switch is built in allowing you to deliver both signals down one coax without adding more devices in line. 0.2dB noise figure, high stability and high gain insures that you get the best possible picture. Only JSC LNBFs have the ability to give you the best reception.
Specifications | |
Input Frequency | 10.7 - 11.7 GHz and 11.7 - 12.75 GHz |
Output Frequency | 950 - 1950 MHz and 1100 - 2150 MHz |
LO Frequency | 9.75 GHz and 10.6 GHz |
LO Initial Accuracy (@25°C) | ± 1 MHz |
LO Temperature Drift (@ -40 to 60°C) | ± 3 MHz |
LO Phase Noise (@ 1 KHz offset) | -60 dBc/Hz |
LO Phase Noise (@ 10 KHz offset) | -80 dBc/Hz |
LO Phase Noise (@ 100 KHz offset) | -100 dBc/Hz |
Noise Figure | 0.2 dB |
Conversion Gain | 50 to 62 dB |
Gain Variation (over operating band) | 5 dB p-p (typical) |
Gain Flatness (any 27 MHz) | ± 0.5 dB |
Cross Pol. Isolation | 20 dB (minimum) 25 dB (typical) |
Image Rejection | 40 dB (minimum) |
P 1 dB | 0 dBm (minimum) |
Output VSWR | 2:1 |
Spurious Response (@ 1700 MHz) | -58 dBm (maximum) |
DC Current Consumption | 180 mA (maximum) |
Polarization Switching Voltage | Vertical: 10.5 to 14.2 volts Horizontal: 15.5 to 21 volts |
Band Switching | Low: 0 KHz, High 22 ± 4 KHz |
LO Spurious | -45 dBm (maximum) |
Operation Temperature | -40°C to 60°C |
Waterproof | +60°C water for 5 minutes |
Output Connector | 75 ohm F type |
KSC322-2 Twin Universal Ku LNBF 0.2dB Noise Figure by DMSIUSA
High gain, high quality Twin Universal Ku LNBF
High gain twin output Ku LNBF using 10.7 to 12.75 GHz Universal with 09750 and 10600 MHz LO frequencies. Rock solid stability and 0.2 dB noise figure.
Twin outputs means you can operate 2 receivers from this LNBF and have full control over both receivers at the same time. You cannot use a splitter to feed two receivers from a single output LNBF. If you are adding that second receiver, this is the LNBF you need. 40mm throat allow mounting it on the most popular dishes. 0.2dB noise and excellent stability means you will have great pictures receiving digital or analog.
Specs:
- Input: 10.70 ~ 12.75GHz
- Output: 950 ~ 2150MHz
- L.O.: 9.75/10.60GHz
- Noise: 0.2dB
- Gain: 60dB
Don't be fooled by the price.
This is the best LNBF featuring very high gain while maintaining great stability.
We have never had a failure of this LNBF.
Ku LNBF Dish Bracket2
Fits many dish arms
Check the pictures to see if it will fit your dish arm.
Bracket2
Ku Adjustable Dish Bracket
Fits many dishes, 40mm with 30mm reducer
Adjustable for perfect alignment
See pictures for measurements
Ku LNBF bracket adds 3 LNBFs to your dish
Add 3 additional LNBFs to your dish with this bracket
Bracket can fit either side of your dish and will add three more LNBFs. Hindged 40mm brackets.
See the pictures for more details
Ku LNBF bracket for Dishnetwork dishes
Re-purpose that old Dishnetwork dish
This bracket fits on the old Dishnetwork dishes letting you use it for Ku. The Ku LNBF bracket size is 40mm.
Don't throw away that old Dishnetwork dish. Use it for Ku with this bracket.
C-band LNBF bracket for Ku dish
Fits 60mm throat and has reducer for 30mm throat
Fits the common 30mm rectangular dish arm.
NOTE: Missing the hardware (screws and bolts)
Sold 'as is'
Cbracket1
Add 2 Ku LNBFs to your dish with this bracket
Mount two Ku LNBFs on your dish
New bracket includes:
- 2 pcs of 40mm LNBF holders
- 2 pcs of 23mm reducers
- 1 pc of hardware mounting kit
- 1 pc of diagram
add2lnbf2
50mm LNBF Mounting Bracket
Single LNBF replacement mounting bracket
Condition: New
This LNBF bracket is for the very large 50mm throat LNBFs.
Rotation degrees on top bracket clamp
Includes:
- 50mm LNBF clamp fits 30mm LNBF support arm
- Clamping screws
- 25mm reducer for smaller throat LNBFs
bracket1lnbf2
40mm LNBF Mounting Bracket
Single LNBF replacement mounting bracket
Condition: New
Includes:
- 40mm LNBF clamp fits 23mm LNBF support arm
- Assembly hardware
- 23-25mm reducer for smaller throat LNBFs
View pictures for more information
bracket1lnbf3
40mm LNBF Mounting Bracket
Single LNBF replacement mounting bracket
Condition: New
Includes:
- 40mm LNBF clamp fits 30mm LNBF support arm
- Assembly hardware
- 23mm reducer for smaller throat LNBFs
View pictures for more information
bracket1lnbf7
Long LNBF Mounting Arms Bracket
Two bracket to add LNBFs to your dish
Condition: New
This is for experimenters who want to add LNBFs to their dish. May need some modifications depending on the dish you have.
Includes:
- 2 pcs of 40mm LNBF clamps
- 2 pcs of 23mm reducer for smaller throat LNBFs
- 1 pc 8.5 inch arm
- 1 pc 3.5 inch arm
View pictures for more information. Sold as is
bracket2lnbf11
KSC322-2 Twin Universal Ku LNBF 0.2dB Noise Figure by DMSIUSA
High gain, high quality Twin Universal Ku LNBF
New, unused, but with no box. Only 1 piece at this cost.
High gain twin output Ku LNBF using 10.7 to 12.75 GHz Universal with 09750 and 10600 MHz LO frequencies. Rock solid stability and 0.2 dB noise figure.
Twin outputs means you can operate 2 receivers from this LNBF and have full control over both receivers at the same time. You cannot use a splitter to feed two receivers from a single output LNBF. If you are adding that second receiver, this is the LNBF you need. 40mm throat allow mounting it on the most popular dishes. 0.2dB noise and excellent stability means you will have great pictures receiving digital or analog.
Specs:
- Input: 10.70 ~ 12.75GHz
- Output: 950 ~ 2150MHz
- L.O.: 9.75/10.60GHz
- Noise: 0.2dB
- Gain: 60dB
Don't be fooled by the price.
This is the best LNBF featuring very high gain while maintaining great stability.
We have never had a failure of this LNBF.
FTA, SKY MEXICO, DBS Satellite Ku Universal Mono-block LNBF for 4° spacing
FREE, just pay shippng.
Brand: DMS International
Model: JSC-MB4-2
Why are these so cheap? We are closing these out at a super low price. They are new. We have not had any problems with this LNBF.
Digital Ready, HDTV approved, latest technology provides the best possible performance.
Receives two satellites at four degree spacing.
Commonly used for Galaxy 19 (97.0°W) and SES 1 (101.0°W)
This is a 'Universal' LNBF that works anywhere in the world.
Works for SKY MEXICO, FTA, DBS, and more.
The famous DMS DiSEqC switch is built in allowing you to deliver both signals down one coax without adding more devices in line. 0.2dB noise figure, high stability and high gain insures that you get the best possible picture. Only JSC LNBFs have the ability to give you the best reception.
Specifications | |
Input Frequency | 10.7 - 11.7 GHz and 11.7 - 12.75 GHz |
Output Frequency | 950 - 1950 MHz and 1100 - 2150 MHz |
LO Frequency | 9.75 GHz and 10.6 GHz |
LO Initial Accuracy (@25°C) | ± 1 MHz |
LO Temperature Drift (@ -40 to 60°C) | ± 3 MHz |
LO Phase Noise (@ 1 KHz offset) | -60 dBc/Hz |
LO Phase Noise (@ 10 KHz offset) | -80 dBc/Hz |
LO Phase Noise (@ 100 KHz offset) | -100 dBc/Hz |
Noise Figure | 0.2 dB |
Conversion Gain | 50 to 62 dB |
Gain Variation (over operating band) | 5 dB p-p (typical) |
Gain Flatness (any 27 MHz) | ± 0.5 dB |
Cross Pol. Isolation | 20 dB (minimum) 25 dB (typical) |
Image Rejection | 40 dB (minimum) |
P 1 dB | 0 dBm (minimum) |
Output VSWR | 2:1 |
Spurious Response (@ 1700 MHz) | -58 dBm (maximum) |
DC Current Consumption | 180 mA (maximum) |
Polarization Switching Voltage | Vertical: 10.5 to 14.2 volts Horizontal: 15.5 to 21 volts |
Band Switching | Low: 0 KHz, High 22 ± 4 KHz |
LO Spurious | -45 dBm (maximum) |
Operation Temperature | -40°C to 60°C |
Waterproof | +60°C water for 5 minutes |
Output Connector | 75 ohm F type |
- 1