Search

2 pieces COBRA 29 CB Radio, 1 Microphone

2 Cobra 29 CB radios and 1 microphone.
1 is working, 1 is not working, sold for parts.

The one that is not working does light up and seems to work but does not transmit.  This is normally easy to fix by replacing the final and/or the driver.  I just do a quick hook up and test.  No in depth testing.

Mounting brackets and mounting bracket screws are included.

Used, Sold "AS IS"

Hard to find, vintage Cobra 25GTL, USED

This Cobra 25GTL was the most sought after CB in the 25 model series.

This CB is used but in good working condition. It has some scratches and scuffs from normal use but is in fair to good condition.

The original microphone is not available so we have substituded a President microphone which works very well. There is no mounting bracket.

Note: Radio and microphone only. Test equipment does NOT come with the CB.

This EXPO 100 Expander is old but has never been used

Very collectable. Box shows aging but otherwise is in good condition.

This list is compiled from information found on the internet. We believe it to be correct  but you may want to do your own research to confirm.

This list is un-confirmed.

We don't know the details of this kit or how to install it.
Selling 'AS IS'.

10 pieces of PL259 connectors

Note: Installation requires soldering the center conductor

Mechanical

By design, all connectors in the UHF connector family mate using the ​5⁄8 inch 24 tpi threaded shell for the shield connection and an approximately 0.156 inch-diameter (4 mm) pin and socket for the inner conductor. Similar connectors (M connectors) with an incompatible 16 mm diameter, 1 mm metric thread have been produced, but these are not standard UHF connectors by definition.

Surge impedance

UHF connectors have a non-constant surge impedance. For this reason, UHF connectors are generally usable through HF and the lower portion of what is now known as the VHF frequency range. Despite the name, the UHF connector is rarely used in commercial applications for today's UHF frequencies, as the non-constant surge impedance creates measurable electrical signal reflections above 100 MHz.

Virtually all of the impedance bump and loss is in the UHF female. A typical SO-239 UHF female, properly hooded, has an impedance bump of about 35 Ohms. The length of the bump is typically ​1⁄2 inch, where the female pin flares to fit over the male pin. This bump can be mitigated by using a honeycomb dielectric in the female pin area. Many VHF/UHF amateur operators use special UHF females that maintain a 50 Ohm surge impedance.

5 Pin DIN Male Solder Connector pins arranged in 180° configuration

The 5 Pin DIN Male Solder Connector pins are arranged in a 180° configuration for use with AT Style connectors. This connector is economic and lightweight. The plug comes in four parts and can be easily disassembled for access to the solder cups. The 5 Pin DIN Male Connector accepts up to 22 AWG wire. The Solder cups are easy to work with and the eyes are easy to thread. The 5 Pin DIN Male Connector is designed with molded strain relief and accepts cables up to 7mm.

Features:

• 5 Pin DIN Male
• Plastic
• Lead Type: Solder Cups
• Molded Strain Relief
• Accepts 22 AWG Wire
• Accepts Cable up to 7mm

Note: color may be gray or black

Used to connect cable with PL-259 connectors, or can be used to change PL-259 male to SO-239 female

Connect 2 coax cables with the barrel connector

• S0-239 UHF female connector.
• Used for connecting two PL-259 connectors together.
• Nickel plated and designed to offer the lowest VSWR rating of the two series
• Size : 27 x 15mm/1.1" x 0.6" (L*D)
• Commercial Grade UHF Series Adapters Nickel-Plated Machined Brass Construction
• Package Content: UHF SO239 Female to Female Connector

Used for equipment grounding. Avoid static charges that can damage your radios. Your ham shack needs this!

Lightning Arrestor Connector PL259(UHF male) Plug TO SO239 plug(UHF Female)

• Coaxial Lightning Arrester,Freq:DC-3GHZ
• PL259(UHF male) Plug TO SO239 plug UHF Female)
• Lightning surge protector for Coaxial cable.
• The Lightning Arrester protectors offer HF/VHF/UHF other frequency equipment with extremely low loss. They boast an insertion loss of less than 0.1 dB.
• Arresters should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building. They can also be installed near the antenna for additional protection.

It is a great lightning protection solution for 2G, 3G, 4G,HF,VHF,UHF and LTE service as well as 2.4 GHz Wi-Fi, 900 MHz, Ham radio and other lower frequency Antenna. This model features PL259(UHF male) Plug TO SO239 plug(UHF Female) to be used inline. This protector will pass DC, so it is suitable for applications where DC is carried through the coax cable. Both connector ports of this unit are equally protected -- it can be installed in either orientation. A ground lug and terminal on the housing provides superior grounding.

Specification

• Frequency Range: DC - 6 GHz
• Impedance: 50 ohms
• Insertion Loss: < 0.1 dB
• Discharge Voltage: DC230V
• Packing includes:1 LIGHTNING ARRESTOR

This reducer adapts a standard PL-259 connector for RG-58 coaxial cables

Features:

• UG-175/U reducers
• Adapts standard PL-259 connector for RG-58 coaxial cables
• Ideal for customizing your own cables
• Silver-plated

This reducer adapts a standard PL-259 connector to RG8X, MINI 8, RG-59, or LMR-240 coaxial cables

Features:

• UG-176/U reducers
• The UG-176/U reducers adapts a UHF Male PL-259 to RG8X, MINI 8, RG-59, or LMR-240 coaxial cable
• Ideal for customizing your own cables
• Silver-plated

Great for replacing your worn connector or for your "build it yourself" projects
when only the BEST will do.

• Antenna Adapter UHF Female SO239 connector
• Impedance: 50ohm
• Low-loss
• Surface treatment: Gold plated
• Application: HAM, CB, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi, Radios, External Antenna, Broadcast, Telecom, CCTV, Microwave Applications, Digital Communication System and more...
• Package includes: UHF Female Panel Connector

Great for replacing your worn connector or for your "build it yourself" projects.

• Antenna Adapter UHF Female SO239 connector
• Impedance: 50ohm
• Low-loss
• Surface treatment: Nickel plated
• Application: HAM, CB, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi, Radios, External Antenna, Broadcast, Telecom, CCTV, Microwave Applications, Digital Communication System and more...
• Package includes: UHF Female Panel Connector