Search
Search Criteria
Products meeting the search criteria
CENTRONICS UHF/VHF/FM OR VIDEO/TV AMPLIFIER
NEW UHF/VHF/FM AMPLIFIER MODEL 1426
New unopened
FEATURES
- High gain
- Low noise figure
- Flat frequency response
- Easy installation
- Gain control & high over load capacity
- Switchable FM trap to stop FM interference
SPECIFICATIONS
Manufacture | Centronics | |
Model No. | 1426 | |
Bandwidth | 50-450MHz | 470-890MHz |
Gain | 28dB | 26dB |
Response Flatness | 2dB | |
Max. Output | 62dBmV | |
Noise Figure | 6dB | 6.5dB |
Impedance | Input | 75 ohm x 1 |
Output | 75 ohm x 1 | |
Connector | AF-61A | |
Power Requirement | 117VAC 60Hz 3.6W | |
FM Trap attenuation rejection band 95-108 MHz (-20dB switchable) |
10 pieces PL259 Connector
10 pieces of PL259 connectors
Note: Installation requires soldering the center conductor
Mechanical
By design, all connectors in the UHF connector family mate using the 5⁄8 inch 24 tpi threaded shell for the shield connection and an approximately 0.156 inch-diameter (4 mm) pin and socket for the inner conductor. Similar connectors (M connectors) with an incompatible 16 mm diameter, 1 mm metric thread have been produced, but these are not standard UHF connectors by definition.
Surge impedance
UHF connectors have a non-constant surge impedance. For this reason, UHF connectors are generally usable through HF and the lower portion of what is now known as the VHF frequency range. Despite the name, the UHF connector is rarely used in commercial applications for today's UHF frequencies, as the non-constant surge impedance creates measurable electrical signal reflections above 100 MHz.
Virtually all of the impedance bump and loss is in the UHF female. A typical SO-239 UHF female, properly hooded, has an impedance bump of about 35 Ohms. The length of the bump is typically 1⁄2 inch, where the female pin flares to fit over the male pin. This bump can be mitigated by using a honeycomb dielectric in the female pin area. Many VHF/UHF amateur operators use special UHF females that maintain a 50 Ohm surge impedance.
UHF SO-239 Female to Female Barrel Connector for PL-259 Plugs
Used to connect cable with PL-259 connectors, or can be used to change PL-259 male to SO-239 female
Connect 2 coax cables with the barrel connector
- S0-239 UHF female connector.
- Used for connecting two PL-259 connectors together.
- Nickel plated and designed to offer the lowest VSWR rating of the two series
- Size : 27 x 15mm/1.1" x 0.6" (L*D)
- Commercial Grade UHF Series Adapters Nickel-Plated Machined Brass Construction
- Package Content: UHF SO239 Female to Female Connector
PL-259 feed through to SO239 Connector with ground lug
Used for equipment grounding. Avoid static charges that can damage your radios. Your ham shack needs this!
Lightning Arrestor Connector PL259(UHF male) Plug TO SO239 plug(UHF Female)
- Coaxial Lightning Arrester,Freq:DC-3GHZ
- PL259(UHF male) Plug TO SO239 plug UHF Female)
- Lightning surge protector for Coaxial cable.
- The Lightning Arrester protectors offer HF/VHF/UHF other frequency equipment with extremely low loss. They boast an insertion loss of less than 0.1 dB.
- Arresters should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building. They can also be installed near the antenna for additional protection.
It is a great lightning protection solution for 2G, 3G, 4G,HF,VHF,UHF and LTE service as well as 2.4 GHz Wi-Fi, 900 MHz, Ham radio and other lower frequency Antenna. This model features PL259(UHF male) Plug TO SO239 plug(UHF Female) to be used inline. This protector will pass DC, so it is suitable for applications where DC is carried through the coax cable. Both connector ports of this unit are equally protected -- it can be installed in either orientation. A ground lug and terminal on the housing provides superior grounding.
Specification
- Frequency Range: DC - 6 GHz
- Impedance: 50 ohms
- Insertion Loss: < 0.1 dB
- Discharge Voltage: DC230V
- Packing includes:1 LIGHTNING ARRESTOR
UG-175/U Reducer for RG-58, Silver Plated for PL-259 connectors
This reducer adapts a standard PL-259 connector for RG-58 coaxial cables
Features:
- UG-175/U reducers
- Adapts standard PL-259 connector for RG-58 coaxial cables
- Ideal for customizing your own cables
- Silver-plated
Specifications | |
---|---|
Part No: | UG-175/U |
RoHS: | Yes |
Type: | UHF Reducing Adapter |
Operating Frequency: | 0 to 300 Hz to MHz |
Gender: | Plug |
Body Orientation: | Straight |
Operating Temperature: | -65 to 165 °C |
Dimension: | 25.4 x 10.92 mm |
Unit of Measure: | Each |
UG-176/U REDUCER FOR PL-259 USED WITH RG8X, MINI 8, RG-59, or LMR-240
This reducer adapts a standard PL-259 connector to RG8X, MINI 8, RG-59, or LMR-240 coaxial cables
Features:
- UG-176/U reducers
- The UG-176/U reducers adapts a UHF Male PL-259 to RG8X, MINI 8, RG-59, or LMR-240 coaxial cable
- Ideal for customizing your own cables
- Silver-plated
Specifications | |
---|---|
Part No: | UG-176/U |
RoHS: | Yes |
Type: | UHF Reducing Adapter |
Operating Frequency: | 0 to 300 Hz to MHz |
Gender: | Plug |
Body Orientation: | Straight |
Operating Temperature: | -65 to 165 °C |
Dimension: | 25.4 x 11.1 mm |
Unit of Measure: | Each |
Gold SO239 UHF Female Chassis Socket
Square Panel Mount Bulkhead Four 4 Hole
Great for replacing your worn connector or for your "build it yourself" projects
when only the BEST will do.
Gold UHF Female SO239 4-Hole Panel Chassis Mount Flange Panel Mount AdapterGold Solder Cup RF Coaxial Coax Connector Adapter for PL259 Male
- Antenna Adapter UHF Female SO239 connector
- Impedance: 50ohm
- Low-loss
- Surface treatment: Gold plated
- Application: HAM, CB, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi, Radios, External Antenna, Broadcast, Telecom, CCTV, Microwave Applications, Digital Communication System and more...
- Package includes: UHF Female Panel Connector
Female Jack SO239 Panel Chassis Mount Connector FOR PL259 MALE PLUG
Great for replacing your worn connector or for your "build it yourself" projects.
UHF Female SO239 4-Hole Panel Chassis Mount Flange Panel Mount AdapterGold Solder Cup RF Coaxial Coax Connector Adapter for PL259 Male
- Antenna Adapter UHF Female SO239 connector
- Impedance: 50ohm
- Low-loss
- Surface treatment: Nickel plated
- Application: HAM, CB, Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi, Radios, External Antenna, Broadcast, Telecom, CCTV, Microwave Applications, Digital Communication System and more...
- Package includes: UHF Female Panel Connector
- 1